d) Remove the SLB harness.
e) Replace the SLB harness.
5. To install the new HKB and SLB harnesses, repeat these steps in reverse order.
Replacing the lamp driver harnesses
The lamp driver harnesses connect the lamp driver module to the housekeeping (HKBA) board.
Estimated replacement time: 18 minutes
1. Remove the integrator module (on page 77).
2. Disconnect the two lamp driver harnesses from the integrator lamp cartridge bracket.
3. Remove the two tension clips around the lamp driver harnesses.
4. Disconnect the lamp driver harnesses from the power connection.
5. Disconnect J89 from the HKBA.
Harnesses
Boxer 4K Service Guide
96
020-101699-04 Rev. 1 (02-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for Boxer 30
Page 1: ...Service Guide 020 101699 04 Boxer 4K...
Page 113: ......