Command
Description
Values
CAV+MODE <value> Determines which FPGA image to load into
the scaler, which defines the input structure
supported by the system. (Saved value)
0 = DP mode (Default)
1 = SDVoE mode
Examples
Select the DisplayPort mode for the CAVE scaler FPGA:
(CAV+MODE 0)
CCA–Color Adjustment
Configures the color adjustments for the projector.
Use this command to also set the native colors for the projector.
Commands
Command
Description
Values
CCA+COPY <value>
Copies the values from one of the other pre-
defined color tables into the custom color
table. This command is only available if
video electronics are on.
0 = Max Drives
1 = Color Temperature
2 = HD Video (ITU-RBT.709)
5 = DCI P3
6 = DCI P3 (D65)
7 = ITU-R BT.2020 color gamut
CCA+CTMP <value>
Sets the color temperature of the projector.
This command is only available if the video
electronics are on, the projector is
configured to use Color Temperature for its
color table, and Color Temperature is
selected. (Saved value)
3200 to 9300
6500 (Default)
CCA+SLCT <value>
Sets the color table. This command is only
available if the video electronics are on.
(Saved value)
0 = Max Drives—Turns off all
color adjustments, projector
runs at maximum brightness
1 = Color Temperature—Selects
color adjustments based on a
color temperature
2 = HD Video (ITU-R BT.709)
3 = Custom settings
4 = Auto Detect (Default)
5 = DCI P3 color gamut
6 = DCI P3 (D65)
7 = ITU-R BT.2020 color gamut
Serial API commands
Christie Technical Reference–Serial Commands
18
020-103316-07 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
