manualshive.com logo in svg

Christie 174-005106-XX, Installation And Setup Manual

Share
Download
Christie 174-005106-XX Installation And Setup Manual Download Page 23

Removing the metal casing

The metal casing must be taken off for pendant and ceiling surface mounting.

1. Remove the disinfecting module from the receiver box.
2. Loosen the four captive screws.

3. Remove the metal casing from the receiver box.

Mounting options

Select one of the following options to mount CounterAct:

Mounting option

Part number Description and adjustable properties

Surface with plate crossbar 174-106108-XX

• Optional mounting option requiring third-party parts (junction

box and hanger)

• Rotation: 180°around vertical axis

• Static load: 6 kg (13.2 lbs)

Recessed with bridge

174-104106-XX

• Mounting option included with the product

• Width: 450 to 650 mm (18 to 26 inches)—horizontal direction

• Height 10 to 70 mm (0.4 to 2.8 inches)—vertical direction

• Rotation: 180°around vertical axis

• Static load: 6 kg (13.2 lbs)

Installation and setup

CounterAct Installation and Setup Guide

23

020-103456-01 Rev. 1 (09-2021)

Copyright 

©

 2021 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for 174-005106-XX


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands