Christie 130-002103-01, User Manual

Page: 66 / 144

54 Matrix StIM™ WQ/SIM WQ User Manual
020-100883-01 Rev. 2 (06-2013)
ArrayLOC
Fine-tune Whites, White Brightness, or Primary
Colors
The Projector Color Adjustment menu lets you fine-tune color or brightness for individual projectors
to accommodate any projector-specific optical elements (e.g. projection lens, fold mirrors, screen
properties or ambient lighting). The following steps outline color adjustments using projector color
settings until the colors appear to match the rest of the projectors in the array. Color adjustments
are evaluated by eye; however, a color meter can help determine the change required. For
information about using a color meter with this procedure, see
Fine-tune Projector Colors with a
Color Meter on page 56.
1. From the Main menu, select ArrayLOC >
Projector Color Adjustment.
2. Use the Target Color Space option to change
the color space. Changing this option applies
the red/green/blue x/y values associated with
the selected option. It also updates the red/
green/blue components of each color on this
menu. Selecting one of the user-defined color
spaces displays the last saved adjustment
values.
3. Use the Red Part/Green Part/Blue Part of “x”
options to make projector specific color adjustments to the selected Target Color Space.
4. Use the Copy Adjustments From drop-down menu to copy the adjustment values from the
selected color space to the current color space. Adjustments are specific to the target color
space. If the color space is changed for the array, projector adjustments can be copied from the
old target color space and fine-tuned again.
5. Use the White Brightness Adjustment option to adjust the RGB brightness for the projector.
i
• The Target Color Space option is
enabled only on the master
projector. All other projector-
specific color adjustments on this
menu are available on all projectors
at all times.
• ColorLOC Status displays ColorLOC
warnings and errors.
i
• If at any time you want to reset the color values to the color adjustment default values (0
or 100) select Clear Adjustments.
• To reset the red part / green part / blue part of each color to the default values set at
factory select the Reset Current Adjustments to Default option.