Christie 130-002103-01, User Manual

Page: 133 / 144

Serial Command Reference
Matrix StIM™ WQ/SIM WQ User Manual 121
020-100883-01 Rev. 2 (06-2013)
Target White Point (TWP)
TWP
CONTROL GROUP:
Preference
SUBCLASS:
Power Up
ACCESS LEVEL:
Operator
Description
This command is used to set the ArrayLOC target white-point. Several preset white points are provided in
addition to four user setting white points. The control subcodes provide access to all the presets. Due to the
large number of sub-codes they are not all listed. Instead a simple substitution for the small 'x' is made,
according to the following table:
0 3200K
1 5000K (D50)
2 6500K (D65)
3 7500K (D75)
4 9300K (D93)
5 User 1
6 User 2
7 User 3
8 User 4
C Current
Subcode
SLCT Description of Use
Selects the white point
0 = 3200K 5 = 9300K (D93)
1 = 5000K (D50) 6 = User 1
3 = 6500K (D65) 7 = User 2
4 = 7500K (D75) 8 = User 3
9 = User 4
WHxX Adjusts the x coordinate of the white color point (0 - 800 with 3 decimal places).
WHxY Adjusts the y coordinate of the white color point (0 - 800 with 3 decimal places).
WHxT Sets user set color temperature and adjusts the white point x and y coordinates.
Available for user settings if SWxT is set to 1.
SWxT Selects whether user presets are generated from white point values (0) or from a
color temperature value (1).
COPY Copy white point settings from preset to current. Value 0-8 for source preset.
Examples:
(TWP+SLCT 5) Select User setting 1.

(TWP+WH6X 290) Set User 2 target white x point to 0.290. 
(TWP+WH2Y ?) Return value of 6500K setting white y point. 
(TWP+SWCT 1) Derive x and y from color temperature setting. 
(TWP+WHCT 8000) Set color temperature to 8000K. 
(TWP+COPY 4) Copy settings from 9300K to current.