Christie 130-002103-01, User Manual

Page: 130 / 144

118 Matrix StIM™ WQ/SIM WQ User Manual 
020-100883-01 Rev. 2 (06-2013)
Serial Command Reference
Screen Orientation (SOR)
System Status (SST)
SOR
CONTROL GROUP:
Preference
SUBCLASS:
Power Up
ACCESS LEVEL:
Operator
Description
Selects the orientation of the displayed image. It can be displayed normally, inverted horizontally, inverted
vertically, or inverted in both directions, as required by the projector installation. Valid values are:

0 = Front Projection 
1 = Rear Projection 
2 = Front Projection Inverted 
3 = Rear Projection Inverted
Subcode
<No Subcode > Description of Use
Example:
(SOR 0) Set image orientation to Front projection.
SST
CONTROL GROUP:
Preference
SUBCLASS:
Power Down
ACCESS LEVEL:
Status
Description
Retrieve the various system status groups.
Subcode
<No Subcode > Description of Use
Returns information on all status groups, with one message
per item.
ALRM Returns a summary of any active alarms.
CONF Returns configuration data - model, sn, build date, etc.
COOL Returns cooling data - cooling fans, air flow, etc.
HLTH Returns system health.
LAMP Returns LAMP operational data.
SIGN Returns signal data - freq, etc.
SYST Returns system data - power, hours of use, shutter open, etc.
TEMP Returns temperature data.
VERS Returns version numbers.
Examples:
(SST+ALRM?) returns (SST+ALRM!000 002 "101" "Prism temperature")

where parameters are P1=index number, P2=error level, P3=value, P4=description. 
Error level is 0=no errors or warnings, 1=warning, 2=error, 3=error and warning.