Christie 130-002103-01, User Manual

Page: 122 / 144

110 Matrix StIM™ WQ/SIM WQ User Manual 
020-100883-01 Rev. 2 (06-2013)
Serial Command Reference
Projector Color Adjustment (PCA)
PJH
CONTROL GROUP:
Unsaved
SUBCLASS:
Power Down
ACCESS LEVEL:
Operator
Description
Allows ArrayLOC projector-specific color adjustments ("tweaks") to be set. Subcodes ROxR - BOxW have a small
'x' listed. The small 'x' represents the color table being edited.
Different color tables, denoted by 'x' - replace 'x' with the following:

S = SD table (Read Only) 
H = HD table (Read Only) 
M = Max drives (Read Only) 
E = Rec 709/EBU (Read Only) 
F = Factory drives (Read Only) 
1 = user table 1 
2 = user table 2 
3 = user table 3 
4 = user table 4 
C = current user table
Subcode
ROxR Description of Use
Adjusts the red part of red. Range 1 - 2000. Expressed with 1
decimal point (Range is 0.1 - 200.0).
GOxR Adjusts the green part of red. Range -1000 - 1000. Expressed
with 1 decimal point (Range is -100.0 - 100.0).
BOxR Adjusts the blue part of red. Range -1000 - 1000. Expressed
with 1 decimal point (Range is -100.0 - 100.0).
ROxG Adjusts the red part of green. Range -1000 - 1000. Expressed
with 1 decimal point (Range is -100.0 - 100.0).
GOxG Adjusts the green part of green. Range 1 - 2000. Expressed
with 1 decimal point (Range is 0.1 - 200.0).
BOxG Adjusts the blue part of green. Range -1000 - 1000. Expressed
with 1 decimal point (Range is -100.0 - 100.0).
ROxB Adjusts the red part of blue. Range -1000 - 1000. Expressed
with 1 decimal point (Range is -100.0 - 100.0).
GOxB Adjusts the green part of blue. Range -1000 - 1000. Expressed
with 1 decimal point (Range is -100.0 - 100.0).
BOxB Adjusts the blue part of blue. Range 1 - 2000. Expressed with
1 decimal point (Range is 0.1 - 200.0).
ROxW Adjusts the red part of white. Range 1 - 2000. Expressed with
1 decimal (Range is 0.1 - 200.0).
GOxW Adjusts the green part of white. Range 1 - 2000. Expressed
with 1 decimal (Range is 0.1 - 200.0).
BOxW Adjusts the blue part of white. Range 1 - 2000. Expressed with
1 decimal (Range is 0.1 - 200.0).
CLRA Clear the current adjustments.
RSTL Reset the current adjustment to factory defaults.
RSTA Reset all adjustments to factory defaults.