Christie 130-002103-01, User Manual

Page: 113 / 144

Serial Command Reference
Matrix StIM™ WQ/SIM WQ User Manual 101
020-100883-01 Rev. 2 (06-2013)
InfraRGB (IFS)
IFS
CONTROL GROUP:
Preference
SUBCLASS:
Power Up
ACCESS LEVEL:
Operator
Description
Configures InfraRGB lighting modes which defines the percentage of RGB and IR brightness. It allows selection of
a number of presets that define these proportions for different lighting conditions such as daylight, moonlight,
starlight. These presets may be customized by the user but have factory default values. See
InfraRGB
Coefficient (IRC)
on page 103.
For subcodes that are lighting mode specific, substitute the lighting mode code for small x in the subcode:
Subcode
SLCT Description of Use
Enable InfraRGB
0 = OFF
1 = ON
ISEQ InfraRGB Source Sequence identifies which frames are IR.
1 = Simultaneous RGB+IR (Main)
2 = Unused
3 = Unused
4 = InfraScene RGB (Main), IR (Secondary)
5 = Interleaved RGB+IR (Main), RGB+IR (Secondary)
ISLM InfraRGB lighting mode preset
1 = daylight 6 = quartermoon
2 = urban 7 = starlight
3 = semiurban 8 = cloudy starlight
4 = moonlight 9 = IR only
5 = halfmoon 10 = User
RGBx RGB Brightness (0-1000) percentage with 1 decimal place.
IRDx IR Brightness (0-1000) percentage with 1 decimal place.
COPY Copy RGB and IR brightness from preset to current. Value 1-
10 for source preset
RSTL Reset current preset to default factory values
RSTA Reset all presets to default factory values
D Daylight
U Urban
V Semiurban
M Moonlight
H Halfmoon
Q Quartermoon
T Starlight
C
Cloudy Starlight
I IR Only
X User mode
B Alias to selected table