Christie 130-002103-01, User Manual

Page: 110 / 144

98 Matrix StIM™ WQ/SIM WQ User Manual 
020-100883-01 Rev. 2 (06-2013)
Serial Command Reference
Serial Flow Control (FLW)
Frame Delay (FRD)
FLW
CONTROL GROUP:
Preference
SUBCLASS:
Power Down
ACCESS LEVEL:
Advanced
Description
Set the flow control for a serial communications port.
Subcode
PRTA Description of Use
Set the mode on port A (RS-232 IN)
.
PRTB
Set the mode on port B (RS-232 OUT)
.
PRTC
Set the mode on port C (RS-422)
.
Examples:
(FLW+PRTA 0) Set no flow control on port A.

(FLW+PRTA 1) Set flow control on port A to software. 
(FLW+PRTA?) Get flow control (FLW+PRTA!001 "Software")
FRD
CONTROL GROUP:
Preference
SUBCLASS:
Power Up
ACCESS LEVEL:
Operator
Description
Delays the output signal timing relative to the Input signal timing by a fraction of a frame, and up to 1 frame.

The value used is a 1/1000th of a frame. For example, 1000 equals 1 frame.
See
Frame Lock Enable (FLE)
on page 97.
Subcode
STAT? Description of Use
Retrieve the actual minimum frame delay.
Examples:
(FRD 500) Delay 0.5 frames.

(FRD+STAT?) Retrieve actual minimum frame delay.