Rotational Vacuum Concentrator RVC 2-33 CDplus
with infrared heating
6 Operation
Version 08/2009, Rev. 3.6 of 22/11/2021
• sb-bs
59 / 105
Translation of the original operating manual
Pos : 162 /200 Chris t/370 R VC-BA (ST ANDARDM ODU LE)/ 060 Betrieb/CD plus /060-0050-0030- 0040 Pr ozess- und Anl agen-Inform ationen @ 25\m od_1404985152870_68. docx @ 187359 @ 4 @ 1
→
6.5.3.4
Process and equipment information
The "Process & equipment Information " menu informs the user about any
error, process, or system messages.
In the event of a message, a sound signal can be heard and the symbol
"
" is displayed on the status bar. In addition, the process and equipment
information is displayed. If the user is in a menu, the window will not be
displayed until the user quits the main menu.
1
Message
2
Status of the
Information
3
Number of messages
pending
4
Function key for
quitting the menu
5
Function key for
acknowledging the
message
Fig. 41: Structure of the process & equipment info window
In addition, the menu can be opened at any time to check whether any
messages are pending.
NOTE
A detailed list of all messages can be found in chapter 7 "Malfunctions
and error correction".
Information status
Every piece of information shown in the process & equipment information
window receives a certain status:
Information present, not acknowledged
Information present, acknowledged
Error no longer present, information not acknowledged
The sound signal continues until all the information is acknowledged.
Once some information is no longer present but has been acknowledged,
the information will be removed from the process & equipment information
window.
In order to quit the process & equipment information window, you have to
acknowledge all of the pieces of information so that the left-hand function
key "back" can be displayed.
Pos : 163 /010 Univ ers almodul e/ Seit enwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1
