Rotational Vacuum Concentrator RVC 2-18 CDplus
HCl resistant version
6 Operation
40 / 84
Version 04/2012, Rev. 2.3 of 03/07/2017
• sb
Translation of the original operating manual
6.5
CDplus control system
The control system CDplus (
“Concentrator Display plus”) stands for a
convenient user interface for the intuitive control of evaporation processes
under rotation.
6.5.1
User interface
1
Left function key
2
Right function key
3
„Up“ key
4
„Down“ key
5
Display
Fig. 17: User interface of the CDplus control system
Function keys (1+2)
The function of these keys depends on the menus and operating states of
the unit. The current key function is displayed in the black field next to the
key.
Fig. 18: Display of the assignment of the function keys;
here: left key "mode", right key "menu"
Up and down keys (3+4)
These keys are used to select the available functions and values or to
change the selected parameter values.
In addition, these keys also control the indication of the measurement value
channels in the value windows. The "up" key is assigned to the left value
window, whereas the "down" key controls the right value window.
• For a selection, press the "up" or "down" key repeatedly until the
desired measurement value channel is indicated in the respective value
window.
Display (5)
The main window of the display is divided into three areas: the values
windows, the assignment of the function keys and the status bar. The main
window shows the process data, e.g. set values and actual values, menus,
and process-relevant information (see figure).
