Freeze-dryer Alpha 3-4 LSCbasic
8 Maintenance and service
80 / 97
Version 11/2018, Rev. 1.2 of 05/03/2019
• sb-pe
Translation of the original operating manuel
8.2
Disinfection of the drying chamber and accessories
• Use commercially-available disinfectants such as, for example, Incidur
,
Meliseptol
, Sagrotan
, Buraton
, or Terralin
(available at specialised
trade).
• The freeze-dryers and the accessories consist of various materials. A
possible incompatibility must be considered.
• Before using cleaning or decontamination agents that were not
recommended by us, contact the manufacturer to ensure that such a
procedure will not damage the freeze-dryer.
• Please contact us if you have any queries (see chapter 7.3 - "Service
DANGER
If dangerous materials (e.g. infectious and pathogenic substances) are
used, the freeze-dryer and accessories must be disinfected.
8.3
Service
DANGER
In the event of service work that requires the removal of the panels, there
is a risk of electric shock or mechanical injury. Only qualified specialist
personnel is authorised to perform this service work.
The freeze-dryer is subject to high mechanical stress. In order to be able to
withstand this high level of stress, high-quality components were used
during the production of the freeze-dryer. Nevertheless, wear cannot be
excluded and it may not be visible from the outside.
This is why we recommend having the freeze-dryer checked by the
manufacturer during an inspection once per year.
Information and appointments:
From Germany:
Contact
Martin Christ Gefriertrocknungsanlagen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)
Tel. +49 (0) 55 22 / 50 07-44 44
E-mail: [email protected]
Outside Germany:
Contact our agency in your country. All agencies are listed at
www.martinchrist.de
[Sales Partners]
NOTE
If you would like to utilise our after-sales-service, please state the type of
your freeze-dryer and its serial number.
