Freeze-dryer Gamma 1-16 LSCplus
Freeze-dryer Gamma 2-16 LSCplus
3 Safety
Version 04/2013, Rev. 2.10 of 09/03/2020
• sb-dc
31 / 126
Translation of the original operating manual
3.7.8
Hazards caused by cold surfaces
WARNING
Risk of freezing to cold surfaces
The ice condenser coils can already be cold during the loading phase.
There is a risk of freezing to the ice condenser coils when touching the
surfaces.
• Wear suitable protective clothes and gloves!
• Do not touch the surfaces on purpose!
→
3.8
Safety devices
→
3.8.1
System check
An internal system check system monitors the data transfer and sensor
signals with regard to plausibility. Errors are detected by continuous self-
monitoring of the system. Error messages are displayed in the main
window under "Process & equipment messages" (chapter 6.5.1.1 - "Main
window "Manual"", chapter 7.2 - "Process and error messages").
→
3.8.2
Earth conductor check
For the earth conductor check, there is an equipotential bonding screw on
the rear panel of the freeze-dryer. An earth conductor check can be carried
out with the aid of a suitable measuring instrument.
