manualshive.com logo in svg

Chris-Craft 2014 32 Corsair RK, Owner'S Manual, Page: 44 / 234

Share
Download
Chris-Craft 2014 32 Corsair RK Owner'S Manual Download Page 44

Types of PFDs 

 
 

 
 
 

There are five types of PFDs: 

 
 

2-19 

2-19 

Table 2.2. 

Types of PFDs 

Type

 

Illustration

 

Description

 

 

 

 

I 

Offshore: 

 

Provides most buoyancy. Designed for remote or rough waters where 
rescue may take awhile. Keeps head out of water in face-up position. 
Comes in two sizes: adult and child. 

 

 

 

II 

Near-Shore: 

 

Intended for calm and inland waters where rescue may be quick. May 
turn unconscious wearer face-up. Not as efficient as Type I. 

 

 

 
 

III 

Flotation Aids: 

 

Vest or full-sleeved jacket style. Intended for calm waters. Not recom-
mended for rough waters as they may not keep individual face-up. Gener-
ally used for water sports. Most comfortable for continuous wear.  Some 
Type III’s will inflate when you enter the water.

 

 

 

 

IV 

Throwable Devices: 

 

Cushion, horseshoe, or ring buoy style. Designed to be thrown to some-
one in the water. Not designed as a personal flotation device that can be 
constantly worn. Should be attached to a polypropylene rope.  
For emergency use only.

 

 

Special Use Device: 

 

Designed for specific activities such as kayaking or water skiing. Varie-
ties include deck suits, work vests, board sailing vests, and hybrid types. 
If counted as a minimum PFD requirement, it must be worn and used in 
accordance with their label.  

 

Hybrid Inflatable: 

 

Least bulky of all PFD types. Has both foam and an inflatable chamber. 
Performance equal to Type I, II, or III PFDs when inflated. To be accept-
able hybrid PFDs must be worn when underway.

 

Special Use Device: 

 

Designed for specific activities such as kayaking or water skiing. Varie-
ties include deck suits, work vests, board sailing vests, and hybrid types. 
If counted as a minimum PFD requirement, it must be worn and used in 
accordance with their label.  

 

Hybrid Inflatable: 

 

Least bulky of all PFD types. Has both foam and an inflatable chamber. 
Performance equal to Type I, II, or III PFDs when inflated. To be accept-
able hybrid PFDs must be worn when underway.

 

 

 
 
 

V 

Safety And Operations 

Summary of Contents for 2014 32 Corsair RK











































































































































































































































Reviews:

No comments