Follow me GSM PSTN gateway
Copyright@ CHOUQIN TECHNOLOGY LIMITED
9
7, Setting part
PSTN →GSM
Connect FWT PSTN port to telephone by telephone line , insert sim card into FWT.Pick up
after telephone is ready, users can set according to below commands after telephone
beeps.
Manual service switch when PSTN as called party. press the call button during talking,
wait two seconds and telephone would show P-, then input new transferred number and
hang up.
1) *00#013#8# ----close function. (PSTN as called party, incoming calls can’t
transferred to GSM)
2) * 00 # 013 # 9 # ------open function. PSTN as called party, incoming calls transferred
to GSM.
3) *00#014#0# ----close function. (PSTN as called party, incoming calls transferred to
GSM,but can’t call an assigned number automatically)
4) * 00 # 014 # 1 # ------open function. PSTN as called party, incoming calls transferred
to GSM and then gsm call an assigned number automatically.
3) * 00 # 041 # 02 * 13xxxxxx # ------set assigned telephone number.
Tips: After the successful set in each command, there will be beep. If error, pls hang up
and start again.
*00#037#99#
Incoming call would transfer to GSM from PSTN within a setting time if
no one answers phone. (00~99seconds. 00 means close this function)
*00#041#02*11111111#
open. PSTN as called party, transfer to GSM, and then
transfer call to an assigned telephone number. 11111111 stands of the assigned
telephone number which should be forwarded to GSM.
*00#042#01*137#
set permitted calling out prefix numbers and numbers from PSTN.
32 groups can be set. 137 stands of prefix number.
*00#043#AA*11111111# set forbidden calling out telephone number or prefix number.
AA: 01~64
（
01 is series number
）
64 groups can be set.
11111111 stands of
telephone number or prefix number.
GSM→PSTN
1) rout call from GSM to PSTN: pick up telephone and press #, then PSTN gets through.
*00#013#1# ---open this function.
*00#013#0# ----close this function.
