Chore-Time ULTRAFLO Cage Free, Installation And Operator'S Manual, Page: 16 / 46

Installatio
n
16
MC
25
07
A
Suspension Drop Line Installation
1.Attach a Pulley (Item 1) to each Hook.
2.Thread the end of the 3/32” or 1/8” cable through the Pulley toward the Winch. Clamp this end to the 3/16” winch cable about 6” (150 mm) from the Pulley,
using a 3/16 inch Cable Clamp (See Figure 11.) . Allow enough drop cable to reach the eye of the Hanger (Single Perch), or the Top Perch Tube (3 Perch)
and thread back through Adjustment Leveler (Item 8).
3.Begin installing suspension drops at the Winch and proceed toward the elbows.
4.Keep the main cable tight between drops. Hang a weight on the end of the main cable to maintain tension.
Figure 12.Supporting the Elbows
5
3
3
3 Perch
Single Perch
10
9
1
2
2
7
Item Description Part No.
1 Pulley 3004
2 Cable Clamp 14898
3 6" [150mm] --
5 Main Cable
6 3/32 [2mm] Drop Cable
7 Screw Hook Opening facing opposite direction of travel.
8 Adjustment Leveler 14337
9 Approximately 20" [50.8 cm] --
10 Approximately 12-1/4" [31.1 cm] --
Use the large hole for 1/8" [3 mm] Drop Cable.
Use the small hole for 3/32" [2 mm] Drop Cable.
8