Chopin Mixolab, Maintenance Manual

Page: 78 / 144

78 Chapter 3 Repair
Maintenance manual
MM-MIXO-EN Ind. 0
04/2012
Mixolab
1. Remove the left and right casings (see op. 1-1) , as well as the
central casing (see op. 1-2) .
2. Cut the cable tie holding the cable on the torquemeter support
(
A ).
3. Undo the screw attaching the torquemeter support to the chas-
sis (
B ), and collect the washer under the support.
4. Slide the support along the torquemeter to remove it.
Refitting the new torquemeter support does not require any
particular instruction.
When re-installing the support, the support base shall be kept
parallel to the chassis: before tightening the screw, place a
gauge of the appropriate thickness (same as washer’s) under
the support other extremity (
C ).
6 : Motor and drive
Operation 6-5 Dismantling/installing the torquemeter support
Sheet: 1 / 1
Consumables:
Tools:
Cable ties
Loctite 222 (pink)
-
B
A
C