Chopin Mixolab, Maintenance Manual

Page: 11 / 144

11
Maintenance manual
MM-MIXO-EN Ind. 0
04/2012
Mixolab
Chapter 1 Operation & Maintenance:
reminders & additional information
3. Control and
maintenance ■
Status of the LED on front panel
In case of error, the LED stops flashing when the error is
acknowledged on the PC. It returns to the colour reflecting
apparatus status.
■
General recommendations
To improve the efficiency of maintenance operations on the devices,
keep an updated record of interventions, dates and any relevant
information on device life.
■
Reminder of useful menus
❏
Maintenance screen
A screen showing the Mixolab mimic diagram monitors operation of
the main modules of the device.
In order to access this mimic diagram, click on "Configuration" and
then on "Maintenance".
Colour / LED status Meaning Note
Off Mixolab switched off
Green Mixolab ready
Flashing green Electronic init problem (memory...) or 230V on
the board See Chapter 2
Amber Motor running (MIXOLAB in cycle)
Flashing amber ERR 4, 41, 42, 5, 51, 52, 53 (motor or torque
error) See Chapter 2
Red Hot bowl (Temperature of the dough
thermocouple or heating block bowl > 50°C)
Blinking red ERR 11, 12, 13, 14, 15, 16, 21, 22 (temperature
error) See Chapter 2
Flashing Green / amber / Red Mixolab self-tests
Continuous flashing Green / amber /
Red (more than 2 minutes) Tank empty when switching on
=> switch off and fill the tank