Chison ECO 6 Operation Manual Download Page 55

Page: 55 / 202

ECO 6 Digital Color Doppler Ultrasound System

Freq

In real status, press the corresponding key of

[Freq]

to adjust.

Base Line

Adjust the position of baseline.

Press p

arameter control key

on [

Baseline

] to change position of baseline.

PRF

Activate [

PRF

] and rotate Menu to Adjust PRF.

Triplex Mode

Activate [

Triplex Mode

] and press the first line key to turn on or off.

Speed

Press p

arameter control key

on [

Speed

] to adjust speed.

Image mode and can be activated only for the phased array probe.

TDI

Image mode and can be activated only for the phased array probe.

5.8.2

Parameters in CW Mode

Press

to select the phased array probe and the examination part, then the CW Mode can be activated.

Activate B Mode and press the parameter key on

[CW]

twice to enter into the CW Mode.

Menu & Parameters

Function description

Keyboard Keys

Gain

In real status, rotate

[GAIN]

knob to adjust the Gain.

Angle

Press

[ANGLE_ZOOM]

selection knob and then rotate the knob to change the

angle of sample gate.

Invert

Press the

key, the displayed image is reversed in the right-left horizontal

direction.

Press the

key, the displayed image is reversed in the up-down vertical

direction.

THI

Turn ON/OFF THI function.

AIO

Press the

[AIO]

knob to activate the AIO function.

Parameter keys

Freq

In real status, press the corresponding key of

[Freq]

to adjust.

Base Line

Adjust the position of baseline.

Press p

arameter control key

on [

Baseline

] to change position of baseline.

PRF

Activate [

PRF

] and press the corresponding key to adjust PRF.

Speed

Press p

arameter control key

on [

Speed

] to adjust speed.

CWD Menu

Function description

2D Map

Activate D 2D Map and rotate [

MENU

Spectrum Enhance

Activate [

Spectrum

Enhance

] and rotate [

MENU

] to adjust Enhance.

Dynamic Range

Activate [

Dynamic Range

] and rotate [

MENU

] to adjust Dynamic.

Chroma

Adjust the type of the chroma.

Wall Filter

Press p

arameter control key

on [

Wall Filter

] to adjust wall filter.

Audio

Adjust audio volume.

Activate [

Audio

] and rotate [

MENU

] to adjust audio volume.

Invert

Press p

arameter control key

on Invert, or press

key to invert

WWW.CFS.IT - CFS PRODOTTI MEDICALI SRL

Summary of Contents for ECO 6











































































































































































































Search results

Summary of Contents for ECO 6

Reviews:

Brands by name

Popular brands

Chison ECO 6, Operation Manual

Search results

Summary of Contents for ECO 6

Reviews:

Brands by name

Popular brands