Chison ECO 1VET Operation Manual Download Page 44

Page: 44 / 173

ECO Series VET Digital Color Doppler Ultrasound System

Press this key to enter into distance measurement.

4.3.7

Trace

Press this key to enter into trace measurement, and press UPDATE to change between trace and ellipse.

4.3.8

Calc

Press this key to enter into measurement software package.

4.3.9

MENU

Press MENU-knob for second time to select the item and adjust the parameters. Press MENU-knob for third

time to exit from current item. Rotate the MENU- knob to select the item

4.3.10

Trackball

Trackball is the main operation tool on screen. Position calipers in measurement, the function of the trackball

is different under diverse working status.

4.4

The key of Image Mode

4.4.1

Display B mode

4.4.2

B/B

Press this key to enter into 2B mode. (This key is not available for ECO 5)

4.4.3

Press this key to enter into 4B mode. (This key is not available for ECO 5)

Summary of Contents for ECO 1VET














































































































































































Search results

Summary of Contents for ECO 1VET

Reviews:

Brands by name

Popular brands

Chison ECO 1VET, Operation Manual

Search results

Summary of Contents for ECO 1VET

Reviews:

Brands by name

Popular brands