Chiroform 125, User Manual

Page: 24 / 78

Combination 860 24
System set-up menu
Touching the Setup button at the bottom of the System Menu screen takes
you to the System Set-up screen.
The Contrast button takes you to a screen where you can adjust the display
contrast using up/down buttons.
The Volume button allows for adjustment of the beeper volume (high or
low).
Language allows you to change the display language to any that are
installed in the unit.
Key-click allows you to turn on or off the beep that happens whenever the
screen is touched.
Touching the Contact button gives you a screen with three options for the
behaviour of the contact alarm. On is the default mode where poor contact
turns out the contact light and stops the timer countdown. Off causes poor
contact to turn out the contact light but not stop the timer countdown. Audio
gives an additional beeping warning (light goes out, timer stops).
The About button displays the model number and installed firmware
version.