Chipkin™
VeederRoot® Gateway User Manual
3381 Cambie Street, #211
© 2018 Chipkin Automation Systems
Vancouver, BC, Canada, V5Z 4R3
All rights reserved
1-866-383-1657
Page 25 of 67
Figure 4.2-6 - Vacuum Sensor Advanced Configuration
Fill out the Vacuum Name and Vacuum Address and click the “insert” button
.
Relay Configuration
To add a relay, click the “Insert” link and select Relay in the “Choose a device type” and you will see
the following form:
Figure 4.2-7 - Relay Advanced Configuration
Interpreting the Setup Report
Typically to complete a VeederRoot configuration, a setup report needs to be printed from the
VeederRoot panel. To print the setup report, follow the instructions found here:
The setup report contains the communication port settings and the list of tanks, sensors, and relays
that are installed on the panel. The following images are examples of setup reports and how to
interpret them to configure the gateway.
System Units
