Basic Use Instructions for CCTV Tester
●
These instructions are intended as a guide to assist in the use of
the
CH-CT5HD
CCTV Tester with standard cameras supplied by
Chipatronic and with MDVR systems. For additional information,
please consult the included Instructions.
●
If you are not familiar with CCTV or Vehicle cameras it is strongly
advised that testing is not commenced until you are familiar
with the process and have carried out suitable training on
working equipment.
●
Any damage to equipment while using the device is not covered
by warranty and no work should be attempted without first
determining that this tester is suitable for the task.
●
This device should not be used for any purpose other than checking CCTV equipment and related items where
covered in this guide.
●
Never use this device in wet conditions or where it can be affected by moisture.
●
Never store the device where it can be affected by moisture.
●
Never use the 12V output from the device for any purpose other than to provide power to 12V cameras.
●
If the device is to be used with components or accessories which are not supplied as standard equipment this shall
be at the user’s own risk. Any fault caused by the use of equipment not supplied with the device or as an optional
accessory will not be covered by warranty.
●
Do not clean the device with solvents or other chemicals. Never use high pressure air to attempt to clean inside the
device.
●
The device includes a re-chargeable battery and should only be charged using the included cable or
●
Should any repairs be required, please return the equipment to the place of purchase.
Please refer to the User Manual for further details and information, Manual is included or may be downloaded from
www.chipatronic.com.au website if a digital copy is available.
DVR are supplied fully configured and tested and should not need further setup. It is not recommended that untrained
users have access to the system menu. If system parameters changes are required, please ensure that only the selected
parameters are altered and that changes are tested before returning the system to normal use.
Important notice: