6-1
6. Operation
6-1 Turning on the power supply
1) Confirm the connections.
2) After opening the door, turn on the power switch at the upper right of the chassis.
(Caution1 )
Setting information and clock are backed up. Also, the display mode is backed up, but the channel number is
not backed up. Accordingly, the range-set lowest channel number data are displayed in case of one-point
continuous display. In the same way, data are displayed starting with the range-set lowest channel number in
case of the multi-point sequential display.
Also, data are displayed by turning on the power supply again after turning it off once under the setting check
condition.
(Caution 2)
If recording is turned off, a date (year, month, day) is not printed when turning on the power supply.
6-2 Display mode selection
This unit provides 6 kinds of display modes, although this depending upon the number of input points.
1) Each measuring data is fixed and displayed every channel.
2) Each measuring data is sequentially displayed every channel.
3)
All input points are displayed collectively. (12-point collective display in case of 12-point unit, 24-point collective display
in case of 24-point unit, 36-point collective display in case of 36-point unit)
4) 12-point measuring data are collectively fixed and displayed. (24-point and 36-point units excluding 12-point unit)
5) 12-point measuring data are collectively and sequentially displayed. (24-point and 36-point units excluding 12-point unit)
6) Type code, serial number, software version number of this unit are displayed.
Display update cycle
Display update cycle of measuring data:
1
second
Display update cycle of input channels:
2 seconds (Setting of this factory delivery value can be changed.)
Collective display update cycle of 12 point data:
3 seconds (Setting of this factory delivery value can be changed.)
1-point fixed display mode: Fixed display of an optional channel.
Stepwise forward move by
▲
key and stepwise backward move by
▼
key
1-point sequential display mode: Input channels are displayed sequentially every 2 seconds.
Stepwise forward move by
▲
key and stepwise backward move by
▼
key
Collective display mode of all points.
12-point fixed display mode: Fixed display of 12 points.
Stepwise forward move by
▼
key and stepwise backward move by
▲
key
Collective forward move of 12 points by
►
key and collective backward move of
12 points by
◄
key
12-point sequential display mode: Sequential display of 12 points.
Stepwise forward move forward by
▼
key and stepwise backward move by
▲
key
Collective forward move of 12 points by
►
key and collective backward move of
12 points by
◄
key
Model code, serial number, software version number display mode
Display modes
(See caution 1)
(See caution 2)
After about 5 seconds,
data are displayed.
Date, time, chart speed, and [POWER ON
＊＊＊
]
are printed and the chart is fed about 3mm.
Power ON
—
LE Series
—
Initial position detection
<
Display
>
<
Printer
>
