- 11 -
4-6. Alarm Output Check
This check is available only on units with alarm output (option). As alarm output, contact signals (ON/OFF) are output to
alarm terminals. This function forces the unit to send the ON/OFF signals to alarm output terminals.
1. Operation procedure
(1) Select check item
Pressing the
key changes check item. Select
.
(2) Start output signal display
Pressing the
key brings the output number display.
(3) Select
output
number
Pressing the
/
key advances/reverses the output number. Select a number to be checked.
(4) Turn
output
ON/OFF
Pressing the
key switches output ON and OFF (display shows “0” for OFF and “1” for ON).
(5) How
to
end
Press the
key and select
, and then press the
key.
The mode changes to the operation mode when the
key is pressed on the passcode entry window
(
).
2. Operation flow chart
(1)
(2)
(3)
(4)
(5)
Check alarm output
Option
Option
Output
Display and meaning
Reference
* This is the case of 6-point alarm output.
The number can be advanced up to 24 depending
on the number of output points.
*
Register passcode “07789”
0: OFF
1: ON
Output