[DB600] General Instruction Manual
MODE c
- 104 -
5-12
MODEc [Remote input parameter]
5-12-1
Setting overview
MODEc provides the remote input related settings. The display is available only for the specification with
communication interface or remote signal input.
The external signal input enables switching between remote and local, and SV setting in the remote
operation.
Also, the instrument can be used as the second controller in a cascade control loop by setting the cascade
input.
See the section 6-10 for details.
5-12-2
Setting item screen and function
Setting item
Function
▲
SEL
↑
↓▼
SEL
In
itia
l s
c
re
e
n
MODEc initial screen
(Remote input
parameter)
MODEc (remote input parameter) initial screen
Pressing the [
] key makes a switch to the MODEb, MODEa, MODE7 or MODE6
screen.
Pressing the [
] key makes a switch to the MODEd or MODEt screen.
No parameter is set by the [ENT] key.
[Switch to operation initial screen]
Press and hold the [MODE] key to display the screen set on the MODEt operation
initial screen.
▲
SEL
↑
↓▼
SEL
R
/L
s
w
itc
h
Remote/local switch
Sets the remote/local switch.
"
"
Local SV operation
"
"
Remote SV operation
* Available only in constant value operation ("Program/constant
value operation switch" set to "OFF")
Use the [
], [
] and [ENT] keys to make a switch between the remote and local
operations.
□
□□
▲
SEL
↑
↓▼
SEL
C
o
rr
e
c
tio
n
/fi
lte
r
Remote SV shift
Sets the remote SV shift.
"
"
to
"
"
-199.99 to 200.00
Use the [
], [
] and [ENT] keys to set the remote SV shift.
Use the [>] key to move the cursor to the right digit.
□□□
▲
SEL
↑
↓▼
SEL
Remote filter
Sets the remote filter.
"
□□□
"
to
"
□□
"
0.0 to 99.9 [sec]
Use the [
], [
] and [ENT] keys to set the remote filter.
Use the [>] key to move the cursor to the right digit.
□□
▲
SEL
↑
↓▼
SEL
T
ra
c
k
in
g
Tracking at switch to
local
Sets the tracking in switching to local.
"
□□
"
Function OFF
"
□□□
"
Tracking function ON
Use the [
], [
] and [ENT] keys to set the tracking in switching to local.
