CHINESPORT Spa – ITALIA
AV3
44/47
AV3 - User Manual rev.1.2 - EN.docx
electromagnetic environment due to fixed RF transmitters, it should be considered an
electromagnetic field survey. If the energy field measured in the space where the AV3 is
used exceeds the applicable RF compliance level, AV3 must be tested to check its normal
operation. If an abnormal activity is found, additional measures may be required, such as
reorientation or repositioning of AV3.
b) Beyond the 150 KHz-80 MHz frequency range, the power range must be less than 3 V / m.
10.3
Recommended separation distances between RF portable
communication devices and mobiles and AV3
AV3 is designed for use in an electromagnetic environment where disturbances of
radiated RF are controlled. The customer or user of AV3 can help to prevent
electromagnetic interference while maintaining a minimum distance between
portable and mobile RF transmitters and AV3 as recommended below, in relation
to the maximum output power of the communication device.
Transmitter
maximum output
power estimate (W)
Separation distance according to transmitter frequency (m)
150 kHz – 80
MHz
d = 1,2√P
80 MHz – 800 MHz
d = 1,2√P
800 MHz – 2.7
GHz
d = 2,3√P
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.74
1
1.2
1.2
2.3
10
3.8
3.8
7.4
100
12
12
23
For transmitters considered at the maximum output power not shown above, the
separation distance in meters (m) recommended can be calculated using the
equation applicable to the transmitter frequency, where P is the estimate of the
maximum output power of the transmitter in Watts (W) according to the
manufacturer of the transmitter.
Note 1: At 80 MHz and 800 MHz, the separation distance for the highest frequency
range applies.
Note 2: These guidelines cannot be applied in all situations. Electromagnetic
propagation is subject to absorption and reflection by structures, objects and
people.
WARRANTY
GENERAL AFTER-SALES SERVICE CONDITIONS FOR CHINESPORT ITEMS
The warranty shall be valid for a period of 24 months from the date of delivery.
The warranty does not cover consumable items, rechargeable batteries, and
generally all materials subject to wear, breakdowns caused by knocks, falls, misuse
or improper use, accidental events and damage while being transported. This
warranty shall be automatically invalidated if the equipment is tampered with.
Repair of the equipment will be carried out in relation to the breakdown reported.
A quotation must be specifically requested.
Payment is cash on delivery, unless otherwise agreed.
Any dispute will be settled solely by the Court of UDINE.
REPAIRS UNDER WARRANTY
Repairs under warranty must be specifically requested.
Repairs under warranty shall be carried out at our workshop and upon
authorization, complete with the return authorization number.
