CHINESPORT Spa – ITALIA
AV3
20/47
AV3 - User Manual rev.1.2 - EN.docx
Item “A” allows to open and close the clamp in order to move the Joystick support
and reach the required position on the table or on the handle. Once the positioning
has been reached clamp the support with the knob “A”. The support must be firmly
clamped in order to guarantee a good stability of the joystick.
Item “B” is used to give the required positioning and orientation of the Joystick
making use of the two spheres of the support:
Once the position has been reached the joystick can be horizontally and vertically
orientated. Clamp firmly the “B” knob if a rigid position is required. Otherwise the
“B” knob can be gentle clamped to obtain an adaptive regulation of the joystick.
Here some joystick positioning examples on the AV3 Table:
Warning
THE JOYSTICK SUPPORT IS NOT INTENDED TO SUPPORT THE PATIENT LOAD. WE
RECOMMEND TO MAINTAIN THE JOYSTICK ALWAYS IN CONTACT WITH THE
TABLE IN ORDER TO GUARANTEE A GOOD STABILITY. DON’T APPLY ALL THE
LOAD ON THE JOYSTICK OR ON THE SUPPORT.
5.5
Normal use of the device
