CHINESPORT Spa – ITALIA
AV3
AV3 -
User Manual rev.1.2 - EN
.docx
19/47
EN
1)
Push the on button (JA).
The LEDs (JE) in the odd
positions (1, 3, 5) will blink
shortly and the use of the
device will not be
possible
2)
Push twice the horn
button (JB) within 10
seconds. The control box
LEDs now will turn on
permanently and the
use of the device will be
enabled again.
5.4
Initial settings
Before the first use of the device is recommended to adjust the settings in relation
with the pathological and physical features of the patient. The set up could be
performed by using all the regulation provided for each option. Please contact your
therapist in order to provide you all the support for the most comfortable setting up
of the device and supervise the first use of the device to check if the latter is used
safely. Please see 5.7 Adjustments and 5.8 Accessories adjustments for all the
adjustments that best fit your model.
Warning
-
A BAD SETUP COULD LIMIT OR PREVENT THE CORRECT USE OF THE DEVICE
-
ADJUST THE KNEE SUPPORTS TO HAVE THE MAXIMUM CONFORT AN THE
MINIMUM STRESS TO THE JOINTS DURING THE VERTICALIZATION PROCESS
-
ADJUST THE HEIGHT OF THE STRUCTURE TO HAVE THE MAXIMUM CONFORT
AND THE BEST POSITION OF THE BODY AND OF THE LIMBS
-
THE REGULATION IN DEPTH OF THE SEAT MUST BE PERFORMED BEFORE
STARTING THE TRANSFER FROM THE WHEELCHAIR
-
BEFORE USE PLEASE CHECK THAT ALL THE REGULATION ITEMS ARE PROPERLY
LOCKED
5.4.1
Joystick placement
AV3 Models that have independent mobility are equipped with a Joystick to control
the device movements inside your locations. The joystick support mainly consist of
two adjustment that allows two degrees of freedom for the positioning and
orientation of the Joystick. The first adjustment is used to reach the required position
on the table or on the handles. The second adjustment is used for the joystick
ergonomically positioning.
JA
JE
JB
