Wispa Portable T frame gantry assembly
instructions
Notes:
If the gantry is to be assembled over a bed
Never assemble the gantry over a bed if it is occupied. The gantry should be
assembled away from a bed and then positioned afterwards (as a guide this
would be approximately 900mm from the head board).
1. Unpack all components
Parts supplied as follows
2 x OHA0123
–Gantry track bracket (pre-fitted to gantry vertical
section)
2 x OHA0124
– Gantry base white painted
2 x OHA0125
– Gantry upright vertical
8 x CHCS091
– M10 x 55MM Hex head bolt
8 x COM1091
– M10 white nut cover
12 x COM1400
– M10 st/steel washer
4 X COM1184
– M6 x 16 skt/cap screw
4 X CH0525
– M10 articulating adjustable foot
1 X OHTRK1 -2.5Mtr Wispa long track (white)
1 x Allen Key
OHTRK16
– Double trolley wheel assembly
(
supplied with wispa lite hoist
)
Tools required 1 x 17mm spanner, allen key (provided)
