14
Assembly / Operating Instructions
Co-sleeping mode (fixing to the bed)
Disassembling the sleeper
Follow the steps ‘removing the lining’ on page 18 to
remove the sleeper lining from the structure.
Repeat the steps ‘assembling the sleeper’ in reverse
to collapse the sleeper. Remove the middle support
frame by pressing the fastening pins on both side of the
sleeper.
WARNING - IMPORTANT FOR THE SAFETY OF YOUR CHILD:
This method is only possible with bed types that comply with all of the
conditions described in this paragraph.
In particular, the side support of the crib should always be put close to
the parent’s mattress and the mattress should always be aligned with
the height of the side support for restraint of the crib. Furthermore, the
crib should be firmly fixed to the structure of the parent’s bed or to the
mattress support.
WARNING:
Check to make sure that the crib in the co-sleeping mode does not
interfere with the parent’s bed.
WARNING:
During use, make sure that the parent’s bed sheets, blankets etc, do not
enter and cover the interior of the sleeper.