CHIKO AIRTEC CHP-5000AT3-DSA-UD, Instruction Manual

Page: 49 / 77

Chapter 2 Components Identification
CMN015-005
原本
(Original instructions) 45
⑨
MODE SELECT
button
During stoppage, transits to the MODE SELECT mode.
“Chapter 4 Configuring Settings (MODE SELECT Mode)” (page
53)
During MODE SELECT mode, returns to the previous mode. During an
error/warning, transits to the error history mode or error clear mode.
2.4
Display Indications
2.4.1
About Modes
2.4.2
Indications during Stoppage
The Up/Down arrow buttons cycle through indications.
Normal mode
ON button OFF button
Screen Transitions in
MODE SELECT Mode
page 53
MODE SELECT button
Registering Initial
Pressures
Page 51
ENTER button
Held down for 3 sec
Main power
switch ON
Registering
Initial Pressures
Page 51
OFF button
Held down for 3 sec
During
stoppage
During
operation
Ver*.** ID.**
Battery ***%
Date: ****/**/**
Time: **:**:**
Program version, RS485 communication ID
Remaining battery level
Date
Time
Clock calibration mode ( Page 55)