R3250Hz Universal Outdoor Series Technical Manual
147
GD Chigo Heating & Ventilation Equipment Co., Ltd.
1 Wireless Remote Controller
1.1 Instructions of remote controller
“HVAC No.2” remote controller (
compatibility with wire controller or lamp board): extension code, applicable
to most VRV models.
“HVAC No.3” remote controller (
compatibility with wire controller or lamp board): general code, applicable to
all models (except of Window machine).
Do not place remote controller near heat sources such as electric blankets or heating furances.
Do not place remote controller in direct sunlight.
Be careful not to drop, otherwise it may cause damage.
No obstacle between the signal receiver and the remote controller, so as not to affect the
transmission and reception of the signal.
Do not splash water or other liquids onto the remote controller.
！
！
Warning
Point the remote controller to the air conditioner, press the button on the remote controller, and
send the command signal to the air conditioner.
If the signal is received correctly, the air conditioner will issue a "beep" prompt.
If the remote controller is not available, please replace the new battery and try again. But if the
problem persists, please contact the seller or our authorized service center.
！
！
Warning
