Model PDR™
Installation Instructions
2
IMPORTANT WARNINGS AND CAUTIONS!
WARNING:
A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION:
A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING:
Improper installation can result in serious personal injury! Make sure that the structural members can
support a redundant weight factor five times the total weight of the equipment: if not, reinforce the structure before
installing the PDR.
WARNING:
Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted.
WARNING:
The installer is responsible for verifying that the wall to which the PDR is anchored will safely support
the combined load of all attached components or other equipment.
WARNING:
The weight of the display placed on the PDR must not exceed 200 lbs. (90.72 kg), the maximum load
capacity of the PDR.
WARNING:
Watch for pinch points. Do not put your fingers between movable parts.
WARNING:
Make sure the mount and brackets are correctly oriented.
WARNING:
Make sure the flag securing the display is completely lowered at all times except when removing or
installing the display.
CAUTION:
Check the unit for shipping damage before you begin the installation.
CONTENTS
IMPORTANT WARNINGS AND CAUTIONS! ............................. 2
Inspect The Unit Before Installing ............................................... 4
SPECIFICATIONS ...................................................................... 4
INTERFACES .............................................................................. 4
TOOLS REQUIRED FOR INSTALLATION ................................. 4
PARTS LIST ................................................................................ 4
INSTALLATION ........................................................................... 5
Install the Mount ....................................................................... 6
Mounting the top bracket .......................................................... 6
Mounting the bottom bracket .................................................... 6
Adjust Height on the PDR ......................................................... 7
Install Cover Plates and End Caps ........................................... 7
Mount the Display......................................................................... 8
CABLE MANAGEMENT .............................................................. 9
ADJUSTMENTS .......................................................................... 10
TENSION ADJUSTMENTS ......................................................... 10
Vertical Tilt Tension Adjustment ............................................... 10
Vertical Tilt Tension Adjustment ............................................... 10
Lateral Tilt Tension Adjustment ................................................ 10
Rotational Tilt Tension Adjustment ........................................... 10
Swing Arm Adjustments .............................................................. 11
Adjusting the Swing Arms Off Center ....................................... 11
Reconfiguring the Swing Arms to the Left or Right of Center ... 12
Swing Arm Tension Adjustment ............................................... 13
REMOVE the Display .................................................................. 14
