I N S T A L L A T I O N I N S T R U C T I O N S
Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone
makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation
or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-
pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this
document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8803-002006 Rev00
©2009 Milestone AV Technologies,
a Duchossois Group Company
09/09
MODEL: HB-011E Custom Projector Bracket
Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
PARTS
Figure 1:
INSTALLATION
WARNING:
IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!
All components must be securely fastened
to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.
1.
Lower custom HB bracket onto top of projector. Ensure that triangle in bracket points towards front of projector. (See Figure 1)
2.
Attach HB bracket to projector using four M6 x 16mm button head screws and four M6 flat washers through each corner of the HB bracket.
(See Figure 1)
Continued...
(1) BRACKET, Custom HB
(4) NUT, Flange, Hex, 5/16-18
(4) SCREW, Button Head, M6 x 16mm
(4) WASHER, Flat, M6
1
2
x 4
