I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
8804-000206 REV. A
1-800-582-6480
952-894-6280 FAX 952-894-6918
2004 Chief Manufacturing
8401 EAGLE CREEK PKWY, STE. 700
www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA
10/04
DISPLAY STATIC MOUNT
FSB-4225
(1) FSB Interface Bracket
(4) Tapped Mounting Buttons
(4) M4 x 6mm Phillips Pan Head Screws
(4) 10-24 x .5 Button Head Cap Screw
(4) .50” Diameter Rubber Bumper
(4) 1/8
”
Hex Key
BEFORE PROCEEDING:
Unpack the carton, verify contents shown in Figure 1 and read
installation instructions completely. If you are missing any of the listed components, please
contact Customer Service at 1-800/582-6480.
Displays are Extremely Fragile.
1. Attach the four (4).50” Diameter Rubber Bumpers to the four (4) “X” location markings
located on the Interface Bracket (see Figure. 2).
2.
Interface installation
**If used with any small flat screen system using Chief Manufacturing’s Q2 (5” x 5”) mounting system.
2a. Using 1/8” Hex Key, assemble (4) mounting buttons to 5” hole pattern on the adapter bracket with the
four (4) 10-24 x .50” Button head cap screws (see Figure 3).
CAUTION!
Figure 1
Figure 2
Figure 3
