8804-000047
01/04
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]
INSTALLATION INSTRUCTIONS
FSP SERIES
SMALL FLAT PANEL DISPLAY
SINGLE SCREEN POLE MOUNT
Exclusive Q2™ Mounting System
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.
(1) FSP Pole-Mounting Bracket
(4) ½” X ½” Nylon Spacers
(4) 10-24 x 1.00 Self-tapping Screws
(1) 5/32” Hex Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
The FSP will fit on any 1/1/2” to 2” O.D. pipe including 1 ½”NPT.
Flat Panel Displays are Extremely Fragile.
If Monitor Uses a Screw Size Other Than M4 X 10mm (M4 X 20mm),
DO NOT USE M4 Screws Provided. Monitor Damage Could Occur.
Interface Bracket Installation:
1.
See installation procedures accompanying your mounting bracket.
Optional Latching Flag Placement:
1.
Remove Phillips head screw, Nylock nut and latching flag (see Figure 2).
2.
Reposition latching flag and secure using Phillips head screw, Nylock nut.
Figure 1
CAUTION!
