background image

I N S T A L L A T I O N       I N S T R U C T I O N S  

PART #D8089

Large Flat Panel Tilt Mount

The Large Flat Panel Tilt Mount is a quick discon-
nect mounting solution for large flat panel displays. 
The mount features adjustability between 0 and 15 
degrees of tilt.

Once the tilt brackets are attached to your display, 
simply install the mount on a wall, lock the display 
in place, and attach your audio/video cables.

BEFORE YOU BEGIN                                                                         

Caution:  To prevent damage to the mount, which could void factory warranty and affect the attached equipment, 
thoroughly study all instructions and illustrations before you begin the installation.  Pay particular attention to the 
“Important Warnings and Precautions” on Page 3.

• If a defect is discovered after Dell’s initial 

21

-day Customer Satisfaction period, Chief Mfg. will, at its option, repair or replace 

the product at no charge provided it is returned during the warranty period.  Please note contact information for Chief Mfg. 
listed below.

• Did you know that home consumers can purchase professional Plasma TV installation services through Dell? Through our 

third-party providers we offer home installation options ranging from simple unboxing and audio/visual component hookup to 
a Premier TV Installation with wall mount and professional installation of up to 5 home theater or surround-sound speakers. If 
you have purchased a Plasma TV Installation offer through Dell, a third-party installation provider should contact you to 
schedule your installation. If you need to schedule this service, please call 1-800-897-1582. If you would like to purchase 
installation services for your new Dell Plasma TV and have not already done so, please contact Dell sales at 1-800-915-3355. 
If you have purchased an installation package, but would like to upgrade your installation service, please call Dell Consumer 
Customer Care at 1-800-624-9897.

CHIEF MANUFACTURING INC.

1-800-582-6480

  952-894-6280  FAX 952-894-6918  

8401 EAGLE CREEK PARKWAY

EUROPE

SAVAGE, MINNESOTA 55378  USA

[email protected]

8805-000086  (Rev. 

D

)

2004 Chief Manufacturing

www.chiefmfg.com

0

2

/0

5

Summary of Contents for D8089






























Reviews: