background image

I N S T A L L A T I O N       I N S T R U C T I O N S  

 

CHIEF MANUFACTURING INC. 

8809-000022 (Rev. A) 

1-800-582-6480

  952-894-6280 FAX 952-894-6918  2004 Chief Manufacturing 

8401 EAGLE CREEK PARKWAY, STE. 700 

www.chiefmfg.com

 

SAVAGE, MINNESOTA 55378  USA 

10/04 

 

CTA-100 

VCR / DVD / Cable Box Adapter 

 

 

 

 

 

 

 

 

 
 
 
 
 
 

BEFORE YOU BEGIN  

 

• 

CAUTION:  To prevent damage to your equipment, which could affect or void the Factory warranty, 
thoroughly study all instructions and illustrations before you begin to install the CTA-100. Pay particular 
attention to the Warnings and Cautions in this document.

 

• 

If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or  
952-582-6480.

The CTA-100 provides a centralized mounting 
solution for a VCR/DVD/cable box. 
 
The shelf on the CTA-100 can be adjusted to fit the 
width and height of most VCR/DVD/Cable Boxes. 
The maximum weight capacity for the CTA-100 is 
50lbs. (22.7 kg).

 

 
The CTA-100 was specifically designed to mount 
underneath any CTV Series TV/Monitor mount. 
 
Depending upon the weight limitations of the 
TV/Monitor mount, the CTA-100 is a stackable 
unit. Up to three CTA-100 units can be stacked. 
The weight of the stacked units cannot exceed 
50lbs. (22.7 kg). 

Summary of Contents for CTA-100










Reviews: