02/04/2013
PM 2946 7002 09
Page 33 of 39
28 Calling up modifying load delay time
Starting from the Main screen:
1.
Press Scroll button (12) until <
P.11
> and the compressor load pictograph is shown.
2.
Press
Enter
button (13).
This screen shows the load delay time (10) and the unit <
s
> seconds.
3.
To modify this value press the
Enter
button (13) (a password may be required).
The value starts blinking.
4.
Use the Scroll buttons (12) to modify the value.
5.
Press the
Enter
button (13) to program the new value.
The minimum and maximum value depends on the parameters.
29 Calling up modifying minimum stop time
Starting from the Main screen:
1.
Press Scroll
button (12) until <
P.12
> and the motor pictograph is shown.
2.
Press
Enter
button (13).
This screen shows the minimum stop time (20) and the unit <
s
> seconds.
3.
To modify this value press the
Enter
button (13).
The value starts blinking.
4.
Use the Scroll buttons (12) to modify the value.
5.
Press the
Enter
button (13) to program the new value.
The minimum and maximum value depends on the parameters.
1
