Chicago Pneumatic CPG 90-120 JD, Instruction Manual

Page: 14 / 56

- 14 -
Drain plugs and filler caps
The drain holes for the engine oil, the coolant and the
plug for the fuel, are located and labelled on the frame
at the service side.
The drain flexible for engine oil can be brought to the
outside of the generator through the drain hole.
Control and indicator panel Qc1002™
General description Qc1002™ control
panel
A1 .......Qc1002™ display
F10 ......Fuse
The fuse activates when the current from the
battery to the engine control circuit exceeds
its setting. The fuse can be reset by pushing
the button.
H0 .......Panel light
S2........Emergency stop button
Push the button to stop the generator in case
of an emergency. When the button is
pressed, it must be unlocked, before the
generator can be restarted. The emergency
stop button can be secured in the locked
position with the key, to avoid unauthorized
use.
S20......ON/OFF switch
Position O: No voltage is applied to the
Qc1002™ module, the generator will not
start.
Position I: Voltage is applied to the
Qc1002™ module, it is possible to start up
the generator.
X25 .....Terminal strip
The drain hole can also be used to
guide external fuel tank connections.