Chicago Pneumatic CPF 175 Instruction Book Download Page 75

Page: 75 / 152

3.20 Version menu

Description

Displays the version number of the application uploaded in the controller.

3.21 Information distributor menu

Description

Displays information that can be customized using the FSP software.

3.22 Password menu

Description

This menu is used to enter a password, needed to modify the parameters (only used by the distributor).

This password is used to modify the parameters in the Conf distr menu.

In case no key is activated during a period of 2 minutes, the password is no longer valid.

3.23 MCC menu

Description

The Multilogic (noted M.C.C.) is a function that can be activated in the presence of an electronic key allowing
the connection of four compressors equipped with an AIRLOGIC

. The operating principle is based on a

control managed by a master compressor commanding the regulation of other machines of the network.

The Multilogic allows maximum one variable speed compressor in the network.

Instruction book

2920 1804 00

Summary of Contents for CPF 175

























































































































































Search results

Summary of Contents for CPF 175

Reviews:

Brands by name

Popular brands

Chicago Pneumatic CPF 175, Instruction Book

Search results

Summary of Contents for CPF 175

Reviews:

Brands by name

Popular brands