Chicago Electric 98706 Set Up, Operating, And Servicing Instructions Download Page 1

Page: 1 / 32

3000 RATED WATTs/3500 MAX. WATTs

poRTAblE gEnERAToR

CERTifiED in CAlifoRniA

Model

98706

sET up, opERATing, AnD sERviCing

insTRuCTions

visit our website at: http://www.harborfreight.com

Read this material before using this product.

failure to do so can result in serious injury.

sAvE This MAnuAl.

2009 by Harbor Freight Tools

contained herein may be reproduced in any shape or form without the express written consent of

Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for

assembly and service may not be included.

for technical questions or replacement parts, please call 1-800-444-3353.

Manual Revised 09g, 09j

using an engine indoors CAn Kill You in

MinuTEs.
Engine exhaust contains carbon monoxide.

This is a poison you cannot see or smell.

nEvER use inside

a home or garage,

EvEn if doors and

windows are open.

only use ouTsiDE

and far away from

windows, doors, and

vents.

Summary of Contents for 98706

































Search results

Summary of Contents for 98706

Reviews:

Related manuals for 98706

Brands by name

Popular brands

Chicago Electric 98706, Set Up, Operating, And Servicing Instructions

Search results

Summary of Contents for 98706

Reviews:

Related manuals for 98706

Brands by name

Popular brands