background image

Diesel generator

98391

set up, operating, anD servicing 

instructions

 

using an engine indoors can Kill You in 

Minutes.
engine exhaust contains carbon monoxide.  

this is a poison you cannot see or smell.

never use inside 

a home or garage, 

even iF doors and 

windows are open.

only use outsiDe 

and far away from 

windows, doors, and 

vents.

Distributed exclusively by Harbor Freight tools

®

.

3491 Mission Oaks Blvd., Camarillo, CA 93011

visit our website at: http://www.harborfreight.com

 read this material before using this product. 

Failure to do so can result in serious injury. 

save tHis Manual.

Copyright

©

 2008 by Harbor Freight Tools

®

.  All rights reserved.  No portion of this manual or any artwork 

contained herein may be reproduced in any shape or form without the express written consent of Harbor 

Freight Tools.  Diagrams within this manual may not be drawn proportionally.  Due to continuing improvements, 

actual product may differ slightly from the product described herein.

For technical questions or replacement parts, please call 1-800-444-3353.

Summary of Contents for 98391











































Reviews: