SKU 96503
For technical questions, please call 1-800-444-3353.
Page 5
aSSeMblY
note:
This Portable Blower with Heater comes assembled. For additional information
regarding the parts listed in the following pages, refer to the
assembly diagram
at the end of this manual
.
note:
Always unplug this Portable Blower with Heater before performing step 1 below.
It is possible to disassemble the Heating Unit (11) from the Blower unit. Unplug
Heating Unit (11) from Receptacle (28), then place fingers of one hand on top of
Heating Unit (11) with thumb on bottom and squeeze. The Heating Unit (11) will
unsnap and you can pull it away from the Blower.
The Blower may be used as a stand alone unit for air circulation.
11 Blower
21
5
8
4
17
Figure 1
Heater Unit (11)
mounts to this
area on Blower
28
To reassemble the Blower and Heating Unit (11), reverse the process in step 1.
This may take a bit of practice as the Heater needs to be positioned in exact posi-
tion before it will snap into place. This job is best done using both hands, being
careful not to pinch fingers. Be sure to plug the Heating Unit (11) back into Recep
-
tacle (28).
1.
2.
3.
