Chicago Dryer King Edge VAc, Instruction Manual

Page: 96 / 302

Operating Principles King Edge Vac
5-18
5.3 Mechanical System
Components that make up the mechanical
system include the following:
Prefeed Drive System
Inlet Drive System
Spread Drive System
Discharge Drive System
ByPass Drive System •
•
•
•
•
Figure 5-17: The prefeed drive system brings the
sheet up to the inlet drive system.
A
B
C
D
E
F
G
Prefeed Drive System
Use the illustration (Figure 5-17) below to
identify the mechanical components of the
prefeed drive system.
The prefeed motor (Figure 5-17, A) powers
the prefeed drive system. A shaft from this motor
extends directly into a drive pulley (B).
This pulley drives a belt (C) which powers
the carriage (E) which moves along a rail (F),
transporting the flatwork up to the Inlet System.
The belt also travels over an idler pulley (D).
Included in the drive system is a pneumatically
controlled clamp (G), which immediately stops
movement of the belt and carriage in cases where
machine operation is stopped by the pressing of
a red safety STOP button.
TOC INDEX