Chicago Dryer King Edge VAc, Instruction Manual

Page: 211 / 302

King Edge VAC 3024-029
C-11
Inlet Adjustments (INL)
The corner stop delay and corner grab delay
can be individually adjusted. When INL is chosen
from the SELECT ADJUSTMENT menu, the
following displays:
CORNER STOP DLY 1.3INCH
CORNER GRAB DLY 0.6INCH
Refer to the table below for information
about each available function to use as a guide
in making adjustments. Note that the CORNER
GRAB DELAY setting only applies when the CHI
SELECT button is lit on the CHI Panel.
Transfer Adjustments (TRN)
The transfer roll hold time and transfer spread
delay can be individually adjusted. When TRN is
chosen from the SELECT ADJUSTMENT menu,
the following displays:
TRANSFER-ROLL .08 SEC
TRANSFER-SPRED .48 SEC
Refer to the table at the bottom of the page for
information about each available function to use
as a guide in making adjustments.
INLET ADJUSTMENTS (INL)
Adjustment Function Range
(Increment)
Low Range
Select
High Range
Select
Standard
Setting
CORNER STOP
DLY
Sets corner size held by clutch/
brake rollers and enables the
upper corner sensors.
0.0” - 3.0”
(0.1’)
Inconsistent
laydown. Corner
length too long.
Inconsistent
clutching. Corner
length too short.
1.3”
CORNER GRAB
DLY
Determines flatwork distance
traveled between clutch/brake
roller release and transfer clamp
pick-up.
0.0” - 1.2”
(0.1”)
Inconsistent
transfer clamping.
Corner length too
long.
Inconsistent
transfer clamping.
Corner length too
short.
0.6”
TRANSFER ADJUSTMENTS (TRN)
Adjustment Function Range
(Increment)
Low Range
Select
High Range
Select
Standard
Setting
TRANSFER-
ROLL
Sets the time flatwork is held by
the clutch rollers after the transfer
assembly has moved into place.
0 - .24 sec
(.04 sec)
Inconsistent
corner clamping
by transfer clamp.
Unit operation is
slower than peak
performance level.
.08 sec
TRANSFER-
SPREAD
Estimated time for rodless air
cylinder to move back into position
for spreader clamps.
.48-.88 sec
(.04 sec)
Spread clamps
arrive in position
and close before
transfer assembly
arrives.
Unit operation is
slower than peak
performance level.
.48 sec
TOC INDEX C-TOC