Chicago Dryer Edge MAXX, Instruction Manual

Page: 61 / 288

Edge MAXX Preventive Maintenance
4-5
Check For String Accumulation
Check for accumulated string and lint on the
drive shaft rollers and bearings.
Perform only when the unit is OFF
with power disconnected.
Figure 4-3: Make sure the clutch brake rollers are
seated evenly against each other.
Check Pneumatic Clutch/Brake
Roller Alignment
Perform only when the unit is OFF
with power disconnected.
Make sure the clutch/brake rollers are seated
evenly against each other (Figure 4-3). It is very
important that these components are aligned
parallel for proper corner clutching. For more
information regarding adjustment, refer to
the
REPAIR
chapter,
Inlet Section
section,
Pneumatic Clutch/Brake Roller Adjustment
procedure.
TOC INDEX