Chicago Dryer Edge MAXX, Instruction Manual

Page: 212 / 288

3024-024e Edge Maxx
C-16
Inlet Section Tests
INL1
This tests the components of the left inlet
station.
The panel display shows:
DOWN/RUN/MED/SLO ROLLERS
209 301 303 304 211/212
INL2
This tests the components of the right inlet
station.
The panel display shows:
DOWN/RUN/MED/SLO ROLLERS
217 302 307 308 219/220
The control system automatically begins to
operate the air cylinder that raises and lowers
the upper arm of the appropriate inlet conveyor,
the appropriate inlet belts run at full, mid and
slow speeds, and the appropriate left and right
side pneumatic clutch/brakes for the selected
inlet station.
Transfer Section Tests
(TRN1)
This tests the components of the left inlet
section transfer section.
This test has a complex display. The top line
of the panel is constant and shows:
LTRAN(F-125,0-127,I-128)
This top line deals with input from the transfer
rodless air cylinder proximity sensors, testing the
forward, home and center sensors.
The bottom line of the panel cycles through
four different displays. Each one showing for
several seconds.
FOR-227 GRAB-213/214 BAK
This line deals with the pneumatic forward
movement of the transfer rodless air cylinder, and
closing of the left inlet station transfer clamps.
IN309 SLO-311 FLOOR-231
This line deals with the left transfer motor
moving to the middle of the machine at regular
and low speeds, and the left side conveyor
motor.
BACK 229 RELEASE-213/211
This line deals with the pneumatic reverse
movement of the left transfer rodless air cylinder,
and the pneumatic opening of the left and right
transfer clamps.
TOC INDEX C-TOC