Chicago Dryer Edge MAXX, Instruction Manual

Page: 205 / 288

Edge Maxx 3024-024e
C-9
III. ADJUSTMENT
Start Adjustment
To adjust any of the CHI panel’s functions,
follow these steps:
Press and hold the ADJUST button; then,
press the ENTER button. Release both
buttons. The SELECT ADJUSTMENT
menu displays as follows:
SELECT ADJUSTMENT
[IRONER] [PGM SPECIFIC]
The flashing cursor is under [IRONER].
Press the CURSOR button until the flash-
ing cursor is under the desired adjustment
area:
[IRONER] is used to make adjustments
to the feeder/ironer speed interconnect
settings. See Ironer Speed Interlock
Adjustments .
[PGM SPECIFIC] is used to make
adjustments only to the currently run-
ning program. See Program Adjust-
ments .
Press the ENTER button. The appropriate
adjustment menu displays.
NOTE: F o r t h e P r o g r a m
Adjustments [PGM SPECIFIC] to
be effective, a program must be
selected via a STATION button
before entering adjustment
mode.
With the desired adjustment menu dis-
played, press the CURSOR button until
the flashing cursor is under the setting to
be adjusted.
1.
2.
•
•
3.
4.
Sometimes it may be necessary to adjust various
settings in order to fine tune the performance of
the unit. In addition, adjustments can be made
to better coordinate the speed of the machines
in the line.
There are six adjustment areas available. Five
of them are global in nature; that is, they affect
all machine operations and programs. One is
program specific and affects only the currently
running program.
NOTE: In order to eliminate
accidental changes, only qualified
supervisors should have access
to the programming section of the
CHI control panel.
WARNING
Never touch any part of the
machine while it is running.
Serious injury could result.
Only trained repair personnel
should work on the unit.
Always think carefully
around moving machinery.
NOTE: Work with another
person. The “buddy system” is
the safest system.
TOC INDEX C-TOC